Features

• Dimmable output current of 10% to 100% of nominal current, by the use ofa 0 to 10Vdc continuous voltage source;
• The lamp may be customized , by using a simple resistor to regulate output current at the value desired;
• Absence of audible noise;
• Protected against short circuit;
• Protected against open circuit;
• Protected against overload;
• Output isolated from input;
• Life expectancy higher than 50,000 hours @ tC;
• Level of protection against bad weather conditions: IP20;
• Installation ambient temperature: 5 to 50°C (41°F to 122°F);
• Supply voltage: 50/60 Hz;
• Maximum housing temperature (tC): 75°C (167°F);
• THD in compliance with IEC 61000-3-2.

Connections and mechanical data

• Use rigid 0.5 to 1.5 mm² cables;
• Strip cables from 8.5 to 9.5 mm;
• Maximum distance between the Driver and LEDs: 2 m;
• Connect the LEDs in the Driver before energizing it in the power grid;
• Ground the driver and the lamp;
• Never use the driver’s dimming voltage (DIM+ and DIM-) as auxiliary source;
• Weight of driver: 0.154 kg.

Connection diagram 1

Connection diagram 2

Dimensions

Table